بوت کردن سرور HP با فلش حاوی HP Smartstart

  • 0

بوت کردن سرور HP با فلش حاوی HP Smartstart

با توجه به اینکه درخواستهای بسیار زیادی از دوستان برای قرار دادن این پست شده بود تیم فنی و مهندسی وی سنتر تصمیم به قرار دادن این پست گرفت.

امیدواریم از این پست لذت ببرید.

Had long wanted to put this post, simplon thing as above, but many times we find (by saving issues) HP servers without CD, so before installing the operating system need to update the firmware on all components of the server with the HP Firmware Maintenance CD and later with the HP SmartStart CD prepare boot, install utilities and drivers from HP on the machine. In the case of not having a CD server can with an HP utility dump them to an external USB or flash drive.

The tool is called HP USB Key Utility, you can download from the official website HP. After downloading can install or remove it to run directly.

With this tool you can transfer images from CD-ROM or DVD-ROM drive to USB (pendrive).

We note that the minimum version is the 7.50 for both HP SmartStart CD cómo HP Firmware Maintenance CD.

Simply select CD / DVD USB drive origin and destination indicate!

From version 1.5 HP USB tool and can combine Smart Start and Maintenance firmaware and even several smart start x86 and x64 in one pendrive. Besides that must be the latest versions of Smart Start and Firmware Maintenance for these combinations.

 


Log out of this account

Leave a Reply

آخرین دیدگاه‌ها

    دسته‌ها