استوریج HP MSA 2040 SAN

استوریج HP MSA 2040 SAN

استوریج HP MSA 2040 SAN

استوریج HP MSA 2040 SAN
استوریج HP MSA 2040 SAN

یک سری از محصولات شرکت hp محصولات ذخیره ساز آن است. که در این رده محصولات ،ذخیره سازهای مبتنی بر تکنولوژی san از اهمیت خاصی برخوردار هستند. محصول جدید شرکت Hp به نام hp msa 2040 یک san storage است که می تواند تا حداکثر 768TB فضا در اختیار شما قرار دهد. روی این محصول امکان نصب 199 عدد هارد 2.5inch SFF SAS/MDL SAS/SSD یا 96 عدد هارد 3.5inch LFF SAS/MDL SAS وجود دارد. این محصول دارای حداکثر 8 عدد پورت فیبر نوری با سرعت 8Gb/s یا 16Gb/s است در ضمن شما می توانید بجای فیبر نوری حداکثر تا 8 عدد پورت 1 GbE/10GbE iSCSI انتخاب کنید.
در زیر به خلاصه ای از مشخصات این محصول اشاره می کنیم:

  • Capacity
    d 768TB Maximum
    Including expansion, depending on model

Drive description
(199) SFF SAS/MDL SAS/SSD or
(96) LFF SAS/MDL SAS
• Maximum including expansion, supported, depending on model
Host interface

16 Gb/8 Gb Fibre Channel (4) Ports per controller
1 GbE/10GbE iSCSI (4) Ports per controller
12Gb/sec SAS (4) Ports per controller
Supported

Storage controller
(2) MSA 2040 SAN Controller
(2) MSA 2040 SAS Controller
Supported

Storage expansion options
HPE MSA 2040 LFF Disk Enclosure or D2700 2.5-inch disk enclosure or the HPE MSA Dual I/O DC Power Carrier Grade SFF (2.5in) Drive Enclosure

Clustering support
Windows, Linux, HP-UX, OpenVMS

SAN backup support
Yes
Systems Insight Manager support
Yes

Compatible operating systems
Microsoft Windows Server 2012
Microsoft Windows 2008
Microsoft Windows Hyper-V
HP-UX
Red Hat Linux
SUSE Linux
VMware ESXi 5.x
VMware ESXi 6.x

Form factor
2U


پروژه راه اندازی HP MSA Storage Replication Adapter 5.1

پروژه راه اندازی HP MSA Storage Replication Adapter 5.1

راه-اندازی-سایت-پشتیبان-VMware-SRM

این مطلب توسط شرکت HP در سال 2013 منتشر شده است و کلیه ارزشهای مادی و معنوی آن متعلق به این شرکت می باشد.

 در این مطلب می خواهیم در خصوص راه اندازی HP MSA Storage Replication Adapter 5.1 در ساختار مجازی VMware ورژن 5.1 بحث نماییم.

شرح کار

 نرم افزار HP MSA Storage Replication Adapter SRA براحتی با نرم افزارهای VMware vCenter Site Recovery Manager SRM ورژن های 5.0 و 5.1 هماهنگ می شود و این یکپارچگی، قابلیت Replication بر روی استوریج های HP MSA 2040 و HP MSA P2000 G3 را برای کاربر به ارمغان می آورد و می توان این عملیات را از این طریق مدیریت نمود.
ترکیب نمودن نرم افزار Remote Snap Replication با این مجموعه می تواند قابلیت های Failover ، Failback و Data Migration را بصورت اتوماتیک میان سایتهای جغرافیایی فراهم نماید.

 مدل تجهیزات

  • HP MSA 2040 array with firmware GL100 or higher Fibre Channel only
  • HP P2000 G3 FC array with TS250P001 firmware or higher
  • HP P2000 G3 iSCSI array with TS250P001 firmware or higher
  • HP P2000 G3 FC/iSCSI array with TS250P001 firmware or higher
نکته مهم: در صورت وجود Firmware قدیمی تر از ورژن TS250P001 بر روی استوریج HP P2000 G3 MSA باید حتما به این ورژن آپدیت گردد تا بتوان عملیات SRA را شروع کرد.

 سیستم عاملها

 این نسخه از SRA بر روی کلیه سیستم عاملهایی که VMware vCenter SRM ورژن های 5.0 و 5.1 را ساپورت می کنند اجرا می گردد.
در وبسایت VMware می توانید وضعیت سازگاری برای VMware Site Recovery Manager را مشاهده فرمایید.

 http://www.vmware.com/support/srm/srm-compat-matrix-5-0.html

قابلیت های جدید

  • پشتیبانی از دستگاه جدید HP MSA 2040
  • پشتیبانی از SRM 5.1
  • بهبود لاگ گیری VMware
  • اضافه شدن اسکریپت get-info.bat برای ساپورت فنی شرکت VMware
  • حذف کلیه Snapshot DRM های unmap شده بعد از وقفه بدلیل عملیات testFailoverStart

پیش نیازها

 سیستم HP MSA SRA به موارد زیر نیاز دارد:

  • دو عدد سرور VMware vCenter که ورژن های ESX و ESXi را ساپورت می کنند باید بصورت هر سایت یک عدد نصب شود.
  • دو عدد Instance از نرم افزار SRM ورژن های 5.0 یا 5.1 باید بصورت هر سایت یک عدد نصب و راه اندازی گردد.
    • VMware recommends installing SRM on servers that are not running vCenter.
    • Do not configure SRM prior to installing the SRA.
    • Additional prerequisites exist for SRM. For more information, see the VMware vCenter Site Recovery Manager Release Notes on the VMware website athttp://www.vmware.com/support/srm/srm_releasenotes_5_1_0.html .
  • Two supported HP MSA 2040 or HP P2000 G3 MSA Systems with Remote Snap licensed and configured, one at each site.

    • P2000 G3 MSA firmware must be TS250P001. If needed, obtain and install the latest TS250 firmware from the HP Support website at http://www.hp.com/support/downloads.
    • All controllers installed in the HP MSA 2040 and P2000 G3 MSA Systems must be the same model.

Installation instructions

  1. Configure the Remote Snap replication sets on the MSA Systems using the Storage Management Utility (SMU). For more information, see the HP MSA 2040 SMU Reference Guide on the HP MSA 2040 manuals website at http://www.hp.com/support/msa2040/manuals, HP P2000 G3 MSA System SMU Reference Guide on the HP P2000 G3 MSA manuals website athttp://www.hp.com/go/p2000/manuals and the HP P2000 Array System Remote Snap Software Technical white paper at http://h20195.www2.hp.com/V2/GetDocument.aspx?docname=4AA1-0977ENW&cc=us&lc=en.
  2. Install VMware vCenter and SRM on their respective severs using instructions provided with those components. Do not yet configure SRM.
  3. Download the HP MSA SRA component to a temporary location on the servers with SRM installed. The filename is in the following format: hp—msa-sra-5.1.0.x.zip, where x represents the release number.
  4. Extract and run hp-msa-sra/setup.exe. Follow onscreen instructions in the installer to install the SRA.
  5. Repeat the SRA installation at the other site.
  6. Configure SRM to use the SRA, using the SRM Plugin vSphere Client.

For more information about configuring and using the SRA see the HP MSA Storage Replication Adapter Software for VMware SRA User Guide

Support

Follow the standard support processes for your HP storage arrays or go to the HP Support website at http://www.hp.com/support.

Documentation feedback

HP is committed to providing documentation that meets your needs. To help us improve the documentation, send any errors, suggestions, or comments to Documentation Feedback (). Include the document title and part number, version number, or the URL when submitting your feedback.


آخرین دیدگاه‌ها

    دسته‌ها